The Dyson V7 and V8 have a basic emptying system.
Guide to Cleaning the Gtech Multi Mk2’s Filter.It’s important to regularly remove any hair that’s become tangled around the Gtech Multi Mk2’s brush bar.
Tangles can reduce the efficiency of the brush, leading to poor cleaning performance..The good news is that it’s easy to take out the brush and cut away the hair.Just follow the steps above and your vacuum will be back to full performance before you know it!.
Do you have any questions about how to remove hair from the Gtech Multi Mk2’s brush bar?Please use the comments section below.
You may also want to read our guide to.
emptying the Gtech Multi Mk2The Gtech Multi Mk2 has a washable filter that needs to be cleaned on a monthly basis.These both need to be removed before you can take out the old battery.. Start by using a Philips screwdriver to remove the screw at the back of the handle.
Once that’s removed, turn the vacuum cleaner onto its side and remove the screw at the front edge of the main body of the battery.. It’s important to note that you should.disassemble the battery itself.
This is very dangerous.You should only remove the two screws holding the battery in position.. You should now be able to slide the V6’s battery out of the machine.